Subsea Interconnect Systems

With its ability to measure up to terra ohms, MK Test Subsea Interconnect Systems are gaining fast adoption with the offshore sector.

Fixing poor connections on the seabed is an expensive business, so testing is a vital part of the preparation of subsea electrical systems.

MK Test has worked with a number of major operators in this sector, and today frequently delivers automated testing to the SEPS (Subsea Electrical Power Standardisation) set of industry-wide standards. This industry initiative has brought together the major exploration specialists including Chevron, ExxonMobil, Petrobras, Shell, Statoil, Total and Woodside to agree common standards for testing, and for electrical components.

If you are making components for subsea use – including umbilicals, jumpers and penetrators –  you need to test to SEPS, and you need MK Test.

SEAFOM TSD-02

Functional design and test specification for subsea electrical and optical connectors and jumpers. Design, fabrication, performance, materials, operation and installation, intervention, testing and qualification for seawater exposed drymate and wet-mate subsea connectors and jumper assemblies as defined in the specification sheet below, for subsea production equipment. Covered designs include; electrical, electrical/optical (hybrid), and optical connectors. 

 

For any enquiries, information or full documents please contact us: sales@mktest.com

 

Application Overview

Subsea Interconnect Systems
Seafom
SEPS

Model Summary & Datasheets

Model-F8500-O&G Rated 8500 VDC

Model-F8500-O&G Rated 8500 VDC

4 Wire Continuity Resistance Measurement
Short Circuit Detection
Insulation Test Voltages up to 2500Vdc
Insulation Resistance Measurement up to 500GΩ
AC Dielectric Hi-Pot test up to 6500Vac

Available in Benchtop, Portable Rack, Concentrated or Distributed format.
Controlled by standard PC or Notebook computer loaded with MK software.

Additional Options.
Partial Discharge at up to 6500VAC to 250pC
Capacitance Measurement.
Inductance Measurement
Distance to Fault detector
Fixed or Floating Earth

Request Full Specification

Model-F15000-O&G Rated 15000 VDC

Model-F15000-O&G Rated 15000 VDC

4 Wire Continuity Resistance Measurement
Short Circuit Detection
Insulation Test Voltages up to 2500Vdc
Insulation Resistance Measurement up to 500GΩ
AC Dielectric Hi-Pot test up to 10000Vac

Available in Benchtop, Portable Rack, Concentrated or Distributed format.
Controlled by standard PC or Notebook computer loaded with MK software.

Additional Options.
Partial Discharge at up to 10000VAC to 250pC
Capacitance Measurement.
Inductance Measurement
Distance to Fault detector
Fixed or Floating Earth

Request Full Specification

Contact MKTest